BRISK CLASSIC CLASSIC

spark gap detail

spark gap detail

SPARK PLUGS WITH CENTRE ELECTRODE FROM NICKEL ALLOY

Spark plugs with centre electrode made from a special nickel alloy, which perfectly cover the requirements of engines without catalysts.

!!! Replacement interval: as recommended by the engine manufacturer / maximum see table below.

One ground electrode. Centre electrode made from a special nickel alloy. Good resistance against electrode burnings. Galvanic zinc plating finish.

Suitable for engines without catalysts.

 

EXPLANATIONS TO THE TABLE:
* custom production
P sealing washer
K sealing cone

!!! Use the recommended tightening torque only !!!

type
code
custom
electrode gap
gasket/seal
Interval
key dimensions
thread length
thread
recommended tightening torque
detail
K19 1420 0,6 P max. 150 motohodin 21 mm 9,5 mm M 14x1,25 25 Nm / 18.5 ft.lbs
J17 3054 0,75 P max. 150 motohodin 21 mm 9,5 mm M 14x1,25 25 Nm / 18.5 ft.lbs
J19 3044 0,75 P max. 150 motohodin 21 mm 9,5 mm M 14x1,25 25 Nm / 18.5 ft.lbs
JR17 3053 0,75 P max. 150 motohodin 21 mm 9,5 mm M 14x1,25 25 Nm / 18.5 ft.lbs
JR19 3043 0,75 P max. 150 motohodin 21 mm 9,5 mm M 14x1,25 25 Nm / 18.5 ft.lbs
L19 1010 0,7 P max. 20.000 km 21 mm 19 mm M 14x1,25 25 Nm / 18.5 ft.lbs
P15 3051 0,6 P max. 150 motohodin 19 mm 9 mm M 14x1,25 25 Nm / 18.5 ft.lbs
P17 3052 0,6 P max. 150 motohodin 19 mm 9 mm M 14x1,25 25 Nm / 18.5 ft.lbs
PR15 3049 0,6 P max. 150 motohodin 19 mm 9 mm M 14x1,25 25 Nm / 18.5 ft.lbs
PR17 3050 0,6 P max. 150 motohodin 19 mm 9 mm M 14x1,25 25 Nm / 18.5 ft.lbs
P15Y 3037 0,6 P max. 150 motohodin 19 mm 9 mm M 14x1,25 25 Nm / 18.5 ft.lbs
P17Y 3023 0,6 P max. 150 motohodin 19 mm 9 mm M 14x1,25 25 Nm / 18.5 ft.lbs
P18Y 3039 0,6 P max. 150 motohodin 19 mm 9 mm M 14x1,25 25 Nm / 18.5 ft.lbs
PR15Y 3022 0,6 P max. 150 motohodin 19 mm 9 mm M 14x1,25 25 Nm / 18.5 ft.lbs
PR17Y 3021 0,6 P max. 150 motohodin 19 mm 9 mm M 14x1,25 25 Nm / 18.5 ft.lbs
PR18Y 3038 0,6 P max. 150 motohodin 19 mm 9 mm M 14x1,25 25 Nm / 18.5 ft.lbs
U15 3007 0,6 K max. 150 motohodin 16 mm 7,8 mm M 14x1,25 15 Nm / 11 ft.lbs
U17 3006 0,6 K max. 150 motohodin 16 mm 7,8 mm M 14x1,25 15 Nm / 11 ft.lbs
UR15 3063 0,6 K max. 150 motohodin 16 mm 7,8 mm M 14x1,25 15 Nm / 11 ft.lbs
UR17 3064 0,6 K max. 150 motohodin 16 mm 7,8 mm M 14x1,25 15 Nm / 11 ft.lbs
U17Y 3067 0,6 K max. 150 motohodin 16 mm 7,8 mm M 14x1,25 15 Nm / 11 ft.lbs
UR17Y 3065 0,6 K max. 150 motohodin 16 mm 7,8 mm M 14x1,25 15 Nm / 11 ft.lbs
brisk